support.cboss.com
cboss Community Network System UpdatesAccount InformationGet AnswersResourcesContact Technical Support
Technical Support
Technical Support
Technical Support
Configure Dial-Up Networking for Windows CE

  • Operating System: Windows CE
  • Application: Dial-up Networking
  1. Click the Start button and choose Programs.

    Choose Programs from the Start menu

  2. Double-tap the Communications folder.

    Communications folder

  3. Double-tap the Remote Communications folder.

    Remote Communications folder

  4. Double-tap the Make New Connection icon.

    Make New Connection

  5. In the Type a name for the connection text box, type EarthLink.

    Type a name for the connection

  6. Select Dial-Up Connection.

    Select Dial-Up

  7. Tap the Next button.

    Tap the Next button

  8. From the Select a modem list, choose your modem.
  9. In the Area code: and Telephone number: text boxes, type your local EarthLink access number. Remember to check with your local telephone company to make sure that the number you choose is a local toll-free call.
  10. Tap the Configure button.

    Tap the Configure button

  11. Select the appropriate Baud rate for your modem. For 14.4 modems use 19200, for 28.8 modems use 38400 and for 33.6k or 56k use 57600.
  12. On the menu bar, tap the OK button.

    Specify Modem information

  13. Tap the TCP/IP Settings button.

    Tap the TCP/IP Settings

  14. Check Server-assigned IP address.
  15. Uncheck Log on to network.
  16. Check Use software compression.
  17. Check Use IP header compression.

    Specify IP Information

  18. Uncheck Server-assigned name server addresses.
  19. In the Primary DNS: text box, type 66.203.14.100
  20. In the Secondary DNS: text box, type 66.203.14.101
  21. In the Primary WINS text box, type 0.0.0.0
  22. In the Secondary WINS text box, type 0.0.0.0

    Specify Server Information

  23. On the menu bar, tap the OK button.
© 2001 cboss Community Network. ALL RIGHTS RESERVED.